פורום הלווינים והטכנולוגיות הישראלי

6. Run Transbox Edition and make sure it is configured properly - i.e. you have set the right com port in Options/Serial and set the Device box to 9600. To get English menus, click Einstellugen/Sprache/English. Right click on the Device: Mediamaster 9600 and then left-click the pop-up menu that appears. Make sure the settings in this dialog box match your receiver. Ignore the bootloader section for the time being - make sure its File Offset check box is clear, ditto for the Channel settings section. Right click on the Software section and choose Insert (or use the Edit menu). In the middle box of the dialog, navigate your way to the DVB2000.bin file you have downloaded and select it. In the left box of this dialog, give it a name. In the Offset section insert 000800 and click Save. You should now have whatever name you gave DVB2000 in the Software section and 000800 in the Offset section. The 000800 offset is only for use with bootloader CI106 (it is 000000 with B2.00uns) and is very important - your receiver may crash if this setting is incorrect. Check the Software File Offset checkbox. You are now ready to start! Wave goodbye to your warranty

The 000800 offset is only for use with bootloader CI106 (it is 000000 with B2.00uns) and is very important - your receiver may crash if this setting is incorrect. Check the Software File Offset checkbox. You are now ready to start! Wave goodbye to your warranty.

3. Now B2.00uns is in the receiver, the Device setting in Transbox must be set to 9200. All future DVB2000 versions should be loaded with these 9200 settings.